Our Products
PENETRON develops and manufactures high quality products for a wide range of waterproofing applications. All of our products undergo rigorous lab and field testing and are produced in our own production facility.
SHORT DESCRIPTION & APPLICATIONS
SBR, enhancing liquid admixture with 48.5% high concentration of solids for mortars and bonding coatings. Enhances the adhesion and provides flexibility, by reducing the absorbedness of concrete mixtures. Mixed in the mixing water.
CONSUMPTION INFORMATION
Indicatively, 5-10% by cement weight (2,5 – 5 Kg per 50 Kg cement bag) or in ratio from 1:1 to 1:4 with the mixing water depending on the use. E.g. for bonding layer (spatterdash) 1:2, for plasters 1:31:4, repairing mortars 1:2-1:3 with water.
| CODIFICATION | COLOR | PACKAGING | PACKAGING INFO | PALLET |
| 11.169241 | White | Pail 5 Kg | 56 Pails / Pallet | 280 Kg |
| 11.169240 | White | Pail 20 Kg | 30 Pails / Pallet | 600 Kg |
| 11.169242 | White | Tank 1.000 Kg | - | 1.000 Kg |
SHORT DESCRIPTION & APPLICATIONS
Styrene / acrylic copolymer emulsion with 57% high concentration of solids, that provides elasticity in mortars. Component that improves the elasticity and the chemical resistance of PENETRON® SEAL COATTM. Applicable self same or after being mixed with water in ratio from 1:1 to 1:3 by weight. Acceptable for contact with potable water.
CONSUMPTION INFORMATION
For the SEAL COATTM system, correspond 2, 4 or 12 Kg of emulsion for each bag. As a mortar plasticizer, it is usually used 3-8% by cement weight (1,5-4,0 Kg per 50 Kg cement bag).
| CODIFICATION | COLOR | PACKAGING | PACKAGING INFO | PALLET |
| 11.282071 | White | Pail 4 Kg | 56 Pails / Pallet | 224 Kg |
| 11.437150 | White | Pail 12 Kg | 40 Pails / Pallet | 480 Kg |
SHORT DESCRIPTION & APPLICATIONS
Acrylic based emulsion for enhancing the adhesion of mortars and concrete, used as admixture (dilution 1:1-1:2 with water) or as primer (self same or 1:1 with water). Attention: as bonding primer, the material must set well. Adhesion open time ~2 weeks. Used also as SEAL COATTM System improvement component.
CONSUMPTION INFORMATION
As adhesion material between old and new mortar or concrete, the 3,8 Lt pail covers 18-22 m2. Attention: good substrate preparation. As SEAL COATTM adhesion enhancing admixture, it corresponds ~2 Kg per bag (the 3,8 Lt pail is ~4 Kg).
| CODIFICATION | COLOR | PACKAGING | PACKAGING INFO | PALLET |
| 10.11002 | White | Pail 3,8 Lt | 4 Pails / Box | 100 Pails / ~ 400 Kg |
SHORT DESCRIPTION & APPLICATIONS
Acrylic based primer to increase adhesion to absorbent and non-absorbent substrates. For absorbent substrates: Two coats, 1: 3 and 1: 1 water diluted, respectively. For normal substrates (eg. concrete): One coat, 1: 1 water diluted. For non-absorbent substrates (eg. tiles, metal, epoxy): One coat, insoluble. Each layer should have dried well. Open adhesion time ~ 24 hours. Suitable as a primer for self-leveling mortars, like INDUSTRIAL TOPPING SL, STANDARD UNDERLAYMENT SL etc.
CONSUMPTION INFORMATION
Indicatively: 18 - 22 m2 per 3,8 Lt pail. Attention: good surface preparation.
| CODIFICATION | COLOR | PACKAGING | PACKAGING INFO | PALLET |
| 10.11006 | Blue | Pail 3,8 Lt | 4 Pails / Box | 100 Pails / ~ 400 Kg |
SHORT DESCRIPTION & APPLICATIONS
One component, polymer modified, non sag, cementitious patch. Fast setting, good finishing for small thicknesses up to 50 mm per coat. Ideal for concrete vertical and overhead repairs. Mixing: 1 bag in 3,3-4,3 Lt water or 1 pail of 4,75 Kg in 0,6-0,8 Lt water (work in small quantities due to the restricted application time ~15 min).
CONSUMPTION INFORMATION
Indicatively, 1 bag fills gaps around 12,7 Lt, For repairs, consumption for filling, is ~ 1,8 Kg/ t or 18 Kg/m2 per 1 cm thickness. For application thicknesses of more than 5 cm, add ~ 7 Kg/bag quartz aggregates QUARTZ SAND MIX 3,0-6,0 MM or 1,5-8,0 MM, for filling volume ~ 16 Lt. The small container (4,75 Kg) covers a volume of about 2,70 Lt.
| CODIFICATION | COLOR | PACKAGING | PACKAGING INFO | PALLET |
| 10.30001 | Grey | Pail 4,75 Kg | 132 Pails / Pallet | 627 Kg |
| 10.20003 | Grey | Bag 22,70 Kg | 48 Bags / Pallet | 1.089,60 Kg |
SHORT DESCRIPTION & APPLICATIONS
One component, modified polymer, repairing mortar for applications requiring increased flexibility, good chemical resistance, finishing and relatively rapid strength increase. Ideal for repairs in concrete elements, stairs, parapets, pipes, balconies, ramps, floors etc. Mixing: 1 bag in 4,7-5,0 Lt water.
CONSUMPTION INFORMATION
1 bag fills ~12 Lt. The consumption, for voids filling, is ~1,9 Kg/Lt or 19 Kg/m2 per 1 cm of repairs thickness. For thicknesses above 5 cm add up to 5,5 Kg/bag QUARTZ SAND MIX 3,0-6,0 MM or 1,5-8,0 MM (filling ~14,5 Lt).
| CODIFICATION | COLOR | PACKAGING | PACKAGING INFO | PALLET |
| 10.20004 | Grey | Bag 22,70 Kg | 48 Bags / Pallet | 1.089,60 Kg |
SHORT DESCRIPTION & APPLICATIONS
One component, non-sag cementitious mortar with synthetic fibers and special modified polymer additives for concrete repairs, stonewall joints, etc., up to 4-5 cm. Supports the repairing preparations of regular waterproofing systems such as SEAL COATTM System. Mixed with only 3.1-3.4 Kg water.
CONSUMPTION INFORMATION
Indicatively, in repairs, the consumption, for voids filling, is ~2,0 Kg/Lt, hence 1 bag fills voids of approx. 12,5 Lt.
| CODIFICATION | COLOR | PACKAGING | PACKAGING INFO | PALLET |
| 12.021-094 | Grey | Bag 25 Kg | 60 Bags / Pallet | 1.500 Kg |
| 12.021-371 | White | Bag 25 Kg | 60 Bags / Pallet | 1.500 Kg |
SHORT DESCRIPTION & APPLICATIONS
One component, polymer modified, new technology, repairing mortar for finishing from feather edge to a maximum thickness of 13 mm with reduced water absorbedness. Suitable for vertical and horizontal concrete surfaces such as walls, facades, stairs, corridors, and passable floors or even in pools surrounding areas. Walkable in approx. 2-3 hours. Excellent adhesion even without the use of primer, in a well damp surface. Mixing: 22,70 Kg bag, in 3,8-5,2 Lt of water.
CONSUMPTION INFORMATION
Indicatively, the consumption per 1 mm repair thickness is ~1,6 Kg/m2 hence the 22,70 Kg bag covers ~15 m2 for 1 mm filling.
| CODIFICATION | COLOR | PACKAGING | PACKAGING INFO | PALLET |
| 10.20007 | Grey | Bag 22,70 Kg | 48 Bags / Pallet | 1.089,60 Kg |
| 10.20008 | White | Bag 22,70 Kg | 48 Bags / Pallet | 1.089,60 Kg |
SHORT DESCRIPTION & APPLICATIONS
One component, controlled expansion, non corrosive, pourable, mortar for grouting, fillings and concrete repairs. Suitable for static repairs and industrial applications such as beams and machinery grouting etc. Wide fluidity range and very high strengths with stable expansion. Mixing: 1 bag in 3,6-4,8 Lt water.
CONSUMPTION INFORMATION
Indicatively, in repairs, 1 bag fills voids of approx. 11-11.8 Lt. For application thicknesses, above 7,5 cm or for total volume above 25 Lt, add up to 50% by weight QUARTZ SAND MIX 1.5-8.0 MM with correspondent increase of the filling volume.
| CODIFICATION | COLOR | PACKAGING | PACKAGING INFO | PALLET |
| 12.01000 | Grey | Bag 25 Kg | 60 Bags / Pallet | 1.500 Kg |
SHORT DESCRIPTION & APPLICATIONS
Cement based grout, with high pumpability, grout sealer for concrete repairs (with grouting machine or casting), anchorages or fillings in masonry and other similar restorations. The very small particle size components in the product, allow the penetration of capillaries and cracks up to 0,4 mm, sealing and enhancing the strength of the repaired area.
CONSUMPTION INFORMATION
Indicative coverage of PENETRON® GROUT INJECT is approx. 18 - 20 Lt per 25 Kg bag.
| CODIFICATION | COLOR | PACKAGING | PACKAGING INFO | PALLET |
| 12.01001 | Grey | Bag 25 Kg | 60 Bags / Pallet | 1.500 Kg |
© 2018 Penetron Hellas - Privacy Policy/GDPR / Terms of use - Site Map
SAFETY DATA SHEET